Manufactur standard Oil Well Cement Defoaming - Lubricants-OBF-HLUB – Oilbayer

Short Description:

Product Detail

Feedback (2)

Our corporation has been specializing in brand strategy. Customers' gratification is our greatest advertising. We also source OEM company for Low-Toxicity Water-Dispersible Lubricant , Lost Circulation Agents , Non-Retarding Fluid Loss Additive , In addition, we would properly tutorial the purchasers about the application techniques to adopt our items plus the way to select appropriate materials.

Manufactur standard Oil Well Cement Defoaming - Lubricants-OBF-HLUB – Oilbayer Detail:

Summary

OBF-HLUB is a specially engineered accretion inhibitor that heads off costly gumbo buildup on bits, BHAs, drill pipe and casing. The offshoot of a special blend of surfactants and lubricants, OBF-HLUB coats cuttings and metal surfaces, effectively reducing the potential for BHA balling and decrease the coefficient of friction. The agent also prevents cuttings accumulation below the bit, minimizing instances of bit balling and generating higher ROP. In addition, OBF-HLUB will decrease fluid loss of drilling fluid and improve the quality of filtration cake to some extent with minimal impact on the rheology of the fluid systems.

Usage range

Temperature:≤150℃ (BHCT).

Recommend dosage：1.0~3.0 % (BWOC).

Technical data

Item	Index
Appearance	Yellow-brown liquid
Density，g/cm³	0.810~0.885
Flash point，℃	≥70
Hydroxyl value, mg KOH/g	35~45
Acid value, mg KOH/g	≤2.0
Reduce rate of torque (6% bentonite mud, 3% dosage), %	≥70

Packing

200kg/Galvanized iron drum or based on customers’ request..

Storage

It should be stored in cool,dry and ventilated areas and avoid being exposed to the sun and rain.

Shelf life: 12 months.

Product detail pictures:

We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Manufactur standard Oil Well Cement Defoaming - Lubricants-OBF-HLUB – Oilbayer, The product will supply to all over the world, such as: Malta , Denver , Danish , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

413 Similar - Solid Powder Fluid Loss

Chemical Additives For Skim Coat

Kolanky Fluid Loss Additives

Mobile Cementing Unit

Oilfield Drilling Materials Fluid Loss Control

r - Polyanionic Cellulose

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.

By Esther from Jeddah - 2015.12.28 15:18

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.

By Margaret from Croatia - 2015.05.13 17:00