Cheapest Factory Sodium Polyacrylate Manufacturer - Fluid Loss Additives-OBC-G86S – Oilbayer

Short Description:

Product Detail

Feedback (2)

We support our purchasers with ideal premium quality products and substantial level company. Becoming the specialist manufacturer in this sector, we've acquired rich practical working experience in producing and managing for Friction Reducer Agent , Oil Well Cementing Materials Densified Microsilica , Oil Well Cementing Chemical , We are now on the lookout ahead to even larger cooperation with abroad consumers dependant on mutual added benefits. When you are interested in almost any of our products, be sure to experience cost-free to make contact with us for more facts.

Cheapest Factory Sodium Polyacrylate Manufacturer - Fluid Loss Additives-OBC-G86S – Oilbayer Detail:

Summary

OBC-G86S is a kind of AMPS polymer fluid loss additive which has the characters of anti-salt, quick strength development and few free water. It is a kind of widespread use product, which can be used in different kinds of cement slurry systems and has good compatibility with other additives. OBC-G86S has few requirements with mixing water and is not only applicable in freshwater cement slurry, but also applicable in sea water cement slurry. The product dosage is not sensitive and there is no mutation point and safety in use.

Usage range

Temperature: 20~120℃ (BHCT).

Recommend dosage：0.4~1.0% (BWOC).

Applicable in every kind of cement slurry systems, which are composed by every grade of oil-well cement(defined by GB10238 or APISpec10A) and other additives(just like silicon powder, drift beads, flyash, bentonite, barite powder and hematite).

Technical data

Item	Index
Appearance	Light yellow powder
pH	7~8
Fluid loss（50℃，6.9MPa，30min），mL	≤30
Free water（50℃），mL	≤1
Slurry composition: SD“G”cement 800g, Fresh water 352g, OBC-G86S 3.2g, OBC-X60L 4g.

Packing

Packaged in 25 Kg multi-ply paper sack with waterproof plastic film inside. Or based on customers' request.

Storage

It should be stored in cool, dry and ventilated areas and avoid being exposed to the sun and rain.

Shelf life:24 months.

Product detail pictures:

As for aggressive price ranges, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such high-quality at such price ranges we're the lowest around for Cheapest Factory Sodium Polyacrylate Manufacturer - Fluid Loss Additives-OBC-G86S – Oilbayer, The product will supply to all over the world, such as: Miami , Chile , Greece , We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.

Anionic Polyacrylamide