18 Years Factory High Temperature Drilling Mud Additive - Lightweight Agents-OBC-P62S – Oilbayer

Short Description:

Product Detail

Feedback (2)

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for Fluid Loss Control , Polymer Fluid Loss Control Additive , Oil Well Cement Friction Reducer For Cementing , Trust us and you'll gain far more. Be sure to really feel free of charge to contact us for additional details, we assure you of our best attention at all times.

18 Years Factory High Temperature Drilling Mud Additive - Lightweight Agents-OBC-P62S – Oilbayer Detail:

Summary

Artificial glass beads are mainly based on borosilicate, ordinary size ranges from 10 to 250μm. Artificial glass beads possess features like high compressive strength, high melting point, high resistivity, low thermal conductivity coefficient and thermal contraction coefficient. They can be used as cement density modifier and effectively lower cement density owing to their own low density. Their nano size also brings them good grain composition effect.

Usage range

Pressure: 40MPa-70 MPa (BHP)

Technical data

Item	Index
Appearance	White Powder
Moisture Content，%	≤0.5
Floating Rate, %	≥95.0
Tap Density，g/cm³	0.30~0.32
Size Range, μm	D90≤95
Volume Content of Particles of Which Size Below 10 μm	≤2.5
Density, g/cm³	0.42~0.6
Tolerant Pressure, MPa	≥34.0
pH(5% dispersion liquid)	8.0~9.5

Packing

Ton bag, 500KG/bag. Or based on customers’ request.

Storage

It should be stored in cool,dry and ventilated areas and avoid being exposed to the sun and rain.

Shelf life:12 months.

Product detail pictures:

It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for 18 Years Factory High Temperature Drilling Mud Additive - Lightweight Agents-OBC-P62S – Oilbayer, The product will supply to all over the world, such as: Niger , Norway , Australia , Our Company policy is "quality first, to be better and stronger, sustainable development" . Our pursuit goals is "for society, customers, employees, partners and enterprises to seek reasonable benefit". We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.

Chemical Solution Fluid Loss Additive

Fluid Loss Additive Cmc

Fluid Loss Cementing Additive

Petrochemical Dispersant Chemical

Phpa Polyacrylamide For Sludge Thickener

White Cmc Powder

As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!

By Dana from UK - 2015.11.02 11:11

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.

By Denise from Eindhoven - 2015.04.25 16:46